4 files changed, 79 insertions, 202 deletions
diff --git a/contrib/measure-net-speed-i3status.bash b/contrib/measure-net-speed-i3status.bash
deleted file mode 100644
index 4eec33b..0000000
--- a/contrib/measure-net-speed-i3status.bash
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-# Public Domain
-# (someone claimed the next lines would be useful for…
-#  people. So here goes: © 2012 Stefan Breunig
-#  stefan+measure-net-speed@mathphys.fsk.uni-heidelberg.de)
-
-# append i3status output to the measure-net-speed’s one.
-# the quote and escape magic is required to get valid
-# JSON output, which is expected by i3bar (if you want
-# colors, that is. Otherwise plain text would be fine).
-# For colors, your i3status.conf should contain:
-# general {
-#   output_format = i3bar
-# }
-
-# i3 config looks like this:
-# bar {
-#   status_command measure-net-speed-i3status.bash
-# }
-
-i3status | (read line && echo $line && read line && echo $line && while :
-do
-  read line
-  dat=$(measure-net-speed.bash)
-  dat="[{ \"full_text\": \"${dat}\" },"
-  echo "${line/[/$dat}" || exit 1
-done)
-\ No newline at end of file
diff --git a/contrib/measure-net-speed.bash b/contrib/measure-net-speed.bash
deleted file mode 100755
index cef4004..0000000
--- a/contrib/measure-net-speed.bash
+++ /dev/null
@@ -1,75 +0,0 @@
-#!/bin/bash
-# Public Domain
-# (someone claimed the next lines would be useful for…
-#  people. So here goes: © 2012 Stefan Breunig
-#  stefan+measure-net-speed@mathphys.fsk.uni-heidelberg.de)
-
-
-# path to store the old results in
-path="/dev/shm/measure-net-speed"
-
-# grabbing data for each adapter. 
-# You can find the paths to your adapters using
-#  find /sys/devices -name statistics
-# If you have more (or less) than two adapters, simply adjust the script here
-# and in the next block. 
-eth0="/sys/devices/pci0000:00/0000:00:19.0/net/eth0/statistics"
-wlan0="/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/net/wlan0/statistics"
-read eth0_rx < "${eth0}/rx_bytes"
-read eth0_tx < "${eth0}/tx_bytes"
-read wlan0_rx < "${wlan0}/rx_bytes"
-read wlan0_tx < "${wlan0}/tx_bytes"
-
-# get time and sum of rx/tx for combined display
-time=$(date +%s)
-rx=$(( $eth0_rx + $wlan0_rx ))
-tx=$(( $eth0_tx + $wlan0_tx ))
-
-# write current data if file does not exist. Do not exit, this will cause
-# problems if this file is sourced instead of executed as another process.
-if ! [[ -f "${path}" ]]; then
-  echo "${time} ${rx} ${tx}" > "${path}"
-  chmod 0666 "${path}"
-fi
-
-# read previous state and update data storage
-read old < "${path}"
-echo "${time} ${rx} ${tx}" > "${path}"
-
-# parse old data and calc time passed
-old=(${old//;/ })
-time_diff=$(( $time - ${old[0]} ))
-
-# sanity check: has a positive amount of time passed
-if [[ "${time_diff}" -gt 0 ]]; then
-  # calc bytes transferred, and their rate in byte/s
-  rx_diff=$(( $rx - ${old[1]} ))
-  tx_diff=$(( $tx - ${old[2]} ))
-  rx_rate=$(( $rx_diff / $time_diff ))
-  tx_rate=$(( $tx_diff / $time_diff ))
-
-  # shift by 10 bytes to get KiB/s. If the value is larger than
-  # 1024^2 = 1048576, then display MiB/s instead (simply cut off  
-  # the last two digits of KiB/s). Since the values only give an  
-  # rough estimate anyway, this improper rounding is negligible.
-
-  # incoming
-  rx_kib=$(( $rx_rate >> 10 ))
-  if [[ "$rx_rate" -gt 1048576 ]]; then
-    echo -n "${rx_kib:0:-3}.${rx_kib: -3:-2} M↓"
-  else
-    echo -n "${rx_kib} K↓"
-  fi
-
-  echo -n "  "
-
-  # outgoing
-  tx_kib=$(( $tx_rate >> 10 ))
-  if [[ "$tx_rate" -gt 1048576 ]]; then
-    echo -n "${tx_kib:0:-3}.${tx_kib: -3:-2} M↑"
-  else
-    echo -n "${tx_kib} K↑"
-  fi
-else
-  echo -n " ? "
-fi
-\ No newline at end of file
diff --git a/contrib/net-speed b/contrib/net-speed
deleted file mode 100755
index 7f332b0..0000000
--- a/contrib/net-speed
+++ /dev/null
@@ -1,100 +0,0 @@
-#!/bin/sh
-
-# Copyright © 2014 Zhong Jianxin <azuwis@gmail.com>
-#
-# See file LICENSE at the project root directory for license information.
-#
-# Thank Stefan Breunig for the original implementation, see
-# contrib/measure-net-speed.bash.
-
-# i3status.conf should contain:
-# general {
-#   output_format = i3bar
-# }
-
-# i3 config looks like this:
-# bar {
-#   status_command exec /usr/share/doc/i3status/contrib/net-speed
-# }
-
-# Single interface
-#ifaces="eth0"
-
-# Multiple interfaces
-#ifaces="eth0 wlan0"
-
-# Auto detect
-ifaces=$(ls /sys/class/net | grep -E '^(eth|wlan)')
-
-# Interval must be the same as in i3status.conf
-#interval=5
-
-if [ -z "$XDG_CONFIG_HOME" ]; then
-  XDG_CONFIG_HOME="${HOME}/.config"
-fi
-
-# Auto detect
-if [ -f "${XDG_CONFIG_HOME}/i3status/config" ]; then
-  i3status_conf="${XDG_CONFIG_HOME}/i3status/config"
-elif [ -f ~/.i3status.conf ]; then
-  i3status_conf=~/.i3status.conf
-else
-  i3status_conf="/etc/i3status.conf"
-fi
-
-if [ -f "$i3status_conf" ]; then
-  interval=$(grep -o '^[[:space:]]*interval[[:space:]]*=[[:space:]]*[[:digit:]]\+' $i3status_conf | grep -o '[[:digit:]]\+')
-fi
-
-if [ x"$interval" = x ]; then
-  interval=5
-fi
-
-last_rx=0
-last_tx=0
-rate=""
-
-readable() {
-    local byte=$1
-    local kib=$(( byte >> 10 ))
-    if [ "$kib" -gt 1024 ]; then
-        local mib_int=$(( kib >> 10 ))
-        local mib_dec=$(( kib % 1024 * 976 / 10000 ))
-        if [ "$mib_dec" -lt 10 ]; then
-            mib_dec="0${mib_dec}"
-        fi
-        echo "${mib_int}.${mib_dec}M"
-    else
-        echo "${kib}K"
-    fi
-}
-
-update_rate() {
-    local rx=0
-    local tx=0
-    for iface in $ifaces; do
-        local tmp_rx
-        local tmp_tx
-        local stat="/sys/class/net/${iface}/statistics"
-        read tmp_rx < "${stat}/rx_bytes"
-        read tmp_tx < "${stat}/tx_bytes"
-        rx=$(( rx + tmp_rx ))
-        tx=$(( tx + tmp_tx ))
-    done
-    rate="$(readable $(( (rx - last_rx) / interval )))↓ $(readable $(( (tx - last_tx) / interval )))↑"
-    last_rx=$rx
-    last_tx=$tx
-}
-
-# while :; do
-#     update_rate
-#     echo "$rate"
-#     sleep "$interval"
-# done
-
-i3status | (read line && echo "$line" && read line && echo "$line" && read line && echo "$line" && update_rate && while :
-do
-    read line
-    update_rate
-    echo ",[{\"full_text\":\"${rate}\" },${line#,\[}" || exit 1
-done)
diff --git a/contrib/net-speed.sh b/contrib/net-speed.sh
new file mode 100755
index 0000000..71a563f
--- /dev/null
+++ b/contrib/net-speed.sh
@@ -0,0 +1,79 @@
+#!/bin/sh
+
+# Authors:
+# - Moritz Warning <moritzwarning@web.de> (2016)
+# - Zhong Jianxin <azuwis@gmail.com> (2014)
+#
+# See file LICENSE at the project root directory for license information.
+#
+# i3status.conf should contain:
+# general {
+#   output_format = i3bar
+# }
+#
+# i3 config looks like this:
+# bar {
+#   status_command exec /usr/share/doc/i3status/contrib/net-speed.sh
+# }
+#
+# Single interface:
+# ifaces="eth0"
+#
+# Multiple interfaces:
+# ifaces="eth0 wlan0"
+#
+
+# Auto detect interfaces
+ifaces=$(ls /sys/class/net | grep -E '^(eth|wlan|enp|wlp)')
+
+last_time=0
+last_rx=0
+last_tx=0
+rate=""
+
+readable() {
+  local bytes=$1
+  local kib=$(( bytes >> 10 ))
+  if [ $kib -lt 0 ]; then
+    echo "? K"
+  elif [ $kib -gt 1024 ]; then
+    local mib_int=$(( kib >> 10 ))
+    local mib_dec=$(( kib % 1024 * 976 / 10000 ))
+    if [ "$mib_dec" -lt 10 ]; then
+      mib_dec="0${mib_dec}"
+    fi
+    echo "${mib_int}.${mib_dec} M"
+  else
+    echo "${kib} K"
+  fi
+}
+
+update_rate() {
+  local time=$(date +%s)
+  local rx=0 tx=0 tmp_rx tmp_tx
+
+  for iface in $ifaces; do
+    read tmp_rx < "/sys/class/net/${iface}/statistics/rx_bytes"
+    read tmp_tx < "/sys/class/net/${iface}/statistics/tx_bytes"
+    rx=$(( rx + tmp_rx ))
+    tx=$(( tx + tmp_tx ))
+  done
+
+  local interval=$(( $time - $last_time ))
+  if [ $interval -gt 0 ]; then
+    rate="$(readable $(( (rx - last_rx) / interval )))↓ $(readable $(( (tx - last_tx) / interval )))↑"
+  else
+    rate=""
+  fi
+
+  last_time=$time
+  last_rx=$rx
+  last_tx=$tx
+}
+
+i3status | (read line && echo "$line" && read line && echo "$line" && read line && echo "$line" && update_rate && while :
+do
+  read line
+  update_rate
+  echo ",[{\"full_text\":\"${rate}\" },${line#,\[}" || exit 1
+done)