summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-12configure: disable pulse on OpenBSD and DragonFlyBSDMichael Stapelberg
This matches the conditional compilation in the code and is more correct than distinguishing linux vs. non-linux (which breaks on Debian’s kFreeBSD and hurd variants). Thanks to sdk for providing an OpenBSD 6.5 environment for verification. This has not been tested on DragonFlyBSD. related to #352
2019-07-12battery: include sys/sysctl.h on OpenBSDMichael Stapelberg
This is required so that CTL_HW and others are defined (ran into this on OpenBSD 6.5).
2019-07-11conditionally compile pulse.c only when using pulseaudioMichael Stapelberg
fixes #352
2019-07-08Fix headers meant for OpenBSD, but snuck in for FreeBSDJasper Lievisse Adriaanse
2019-07-08Extend battery handling on OpenBSD (#351)Jasper Lievisse Adriaanse
If acpibat watts value is not available, try current (for batteries that report in amps), then convert to watts. originally submitted by @jcs
2019-06-30release v2.132.13Michael Stapelberg
2019-06-18Merge pull request #347 from thrasymache/overflowIngo Bürk
print_file_contents: allocate enough to include \0
2019-06-10print_file_contents: allocate enough to include \0Sam Newbold
related to #331 Previously, if max_chars was read, the null byte would be written past the end of buf.
2019-02-21Added function to print content from file (#331)Dennis Vesterlund
Added a function to print file contents to status bar without newlines. Added tests for print file contents function Added manpage entry for file contents
2019-02-11configure.ac: complain when asciidoc cannot be foundMichael Stapelberg
related to #338
2019-02-11configure.ac: complain when xmlto cannot be foundMichael Stapelberg
related to #338
2019-02-11Makefile.am: s/I3LOCK/I3STATUS/Michael Stapelberg
2019-02-11README: update build instructionsMichael Stapelberg
2019-02-03Merge pull request #336 from gokcehan/patch-1Ingo Bürk
default config: move disk info out of network info
2019-02-03default config: move disk info out of network infogokcehan
By default, disk info is found in a strange place in between ipv6 and wireless information. This commit puts it in between other performance meters. Settings in the file are also now sorted according to their places in the order.
2019-01-27Merge pull request #334 from stapelberg/speedIngo Bürk
fix ethernet speed display for 100 Gbit/s cards
2019-01-27fix ethernet speed display for 100 Gbit/s cardsMichael Stapelberg
Before this fix, i3status would display 34464 Mbit/s instead of 100000 Mbit/s, because it was only looking at ecmd.speed, ignoring ecmd.speed_hi.
2019-01-27Merge pull request #333 from stapelberg/sysconfdirIngo Bürk
fix: use SYSCONFDIR in error message
2019-01-27fix: use SYSCONFDIR in error messageMichael Stapelberg
2019-01-23Merge pull request #332 from eplanet/fix-macos-buildOrestis
Fix non Linux build for #309
2019-01-23Fix non Linux build for #309eplanet
2019-01-23Switch to autotools (#316)Michael Stapelberg
2019-01-23Implement %devicename specifier for volume module (#325)Denton Liu
This commit implements the %devicename specifier for the volume module for both PulseAudio and ALSA. This way, i3status will be able to display the specific device that corresponds to the volume indicator. Note that this is not implemented for the OSS API but is left in a state where someone can pick it up for the future.
2019-01-13Merge pull request #328 from jdevelop/fix/capture-volume-statusIngo Bürk
Fixed ALSA capture device monitoring.
2019-01-03Fixed ALSA capture device monitoring.Eugene Dzhurinsky
When using ALSA, the "Capture" mixer doesn't have the playback channel, instead "capture"-related methods should be used to get information about the current volume / state of the mixer.
2018-11-17Merge pull request #321 from eplanet/autodisplay-tzIngo Bürk
Add timezone switch
2018-11-15Corrections according to PR revieweplanet
2018-11-10Add timezone switcheplanet
2018-11-08Merge pull request #319 from eplanet/fix-etc-mtabOrestis
Read /proc/mounts if /etc/mtab can't be read
2018-11-08Merge pull request #320 from eplanet/fix-error-msgIngo Bürk
Fix error messages
2018-11-08Read /proc/mounts if /etc/mtab can't be readeplanet
2018-11-07Fix error messageseplanet
2018-11-05Merge pull request #309 from TwentyFourD/NonConsecutiveCPUsOrestis
Support non-consecutive CPUs
2018-11-05print_cpu_usage.c: Support non-consecutive CPUsTwentyFourD
Fixes #308
2018-10-26Merge pull request #318 from gportay/fix-invalid-cpu-placeholderIngo Bürk
print_cpu_usage: fix invalid %cpu placeholder output
2018-10-23Add testcase for invalid %cpu placeholderGaël PORTAY
2018-10-21print_cpu_usage: fix invalid %cpu placeholder outputGaël PORTAY
Currently, the module cpu_usage prints %cpu0 information for the invalid %cpu placeholder (i.e. the cpu number is missing). Consider the following configuration. order += "cpu_usage" cpu_usage { format = "cpu0=%cpu0 cpu1=%cpu1 cpu=%cpu" # missing cpu number -------------------^ } The configuration above produces the output below. $ i3status -c config i3status: trying to auto-detect output_format setting i3status: auto-detected "term" cpu0=-2% cpu1=-49% cpu=-2% cpu0=06% cpu1=02% cpu=06% cpu0=05% cpu1=06% cpu=05% ... The module prints %cpu0 at the third placeholder where it should report an error. This commit fixes this behavior by initializing `number' to -1. If the cpu is missing in %cpu placeholder, the sscanf function does not set `number'. Because `number' is -1 (lower to 0), an error is reported and the placeholder is skipped. $ i3status -c ./config i3status: trying to auto-detect output_format setting i3status: auto-detected "term" provided CPU number '-1' above detected number of CPU 4 cpu0= cpu1=-48% cpu= provided CPU number '-1' above detected number of CPU 4 cpu0= cpu1=11% cpu= provided CPU number '-1' above detected number of CPU 4 cpu0= cpu1=03% cpu= ...
2018-10-19Merge pull request #315 from gportay/fix-typo-in-manOrestis
man: fix typo for max_threshold in load
2018-10-18man: fix typo for max_threshold in loadGaël PORTAY
Floating values use a dot (not a comma). Fixes: invalid floating point value for option 'max_threshold'
2018-10-11Provide a more natural volume percentage with ALSA.arcnmx
The rationale of the code is explained in the header: http://git.alsa-project.org/?p=alsa-utils.git;a=blob;f=alsamixer/volume_mapping.c;h=1c0d7c45e6686239464e1b0bbc8983ea57f3914f;hb=HEAD > The mapping is designed so that the position in the interval is > proportional to the volume as a human ear would perceive it (i.e., the > position is the cubic root of the linear sample multiplication > factor). and the commit message: http://git.alsa-project.org/?p=alsa-utils.git;a=commit;h=34bb514b5fd1d6f91ba9a7b3a70b0ea0c6014250 > use a mapping where the bar height is proportional to the audible > volume, i.e., where the amplitude is the cube of the bar height. and further explanation can be found in the pull request: https://github.com/i3/i3status/pull/268#pullrequestreview-147429763
2018-10-07strncpy + strlen is pointless (#312)Orestis
strlen already assumes that the string is NULL-terminated. Fixes -Wstringop-overflow warning
2018-09-04Merge pull request #305 from David96/masterIngo Bürk
Add support for "POWER_SUPPLY_STATUS=Not charging" (fixes #304)
2018-09-03Add testcase for #304David96
2018-09-03Add support for "POWER_SUPPLY_STATUS=Not charging" (fixes #304)David96
2018-08-27Merge pull request #302 from coderonline/masterIngo Bürk
Added %interface to the ethernet options
2018-08-24Added %interface to the ethernet optionsMax Christian Pohle
2018-08-01Merge pull request #301 from wmarvel/issue300Ingo Bürk
Fix for issue 300: Correctly print usage for cpu 10
2018-07-31Fix for issue 300: Correctly print usage for cpu 10=
2018-07-16Merge pull request #296 from Stunkymonkey/include-orderIngo Bürk
switch to clang 3.8 & ignore include sort order
2018-07-16Merge pull request #299 from tuxillo/patch-2Ingo Bürk
Detect interface type on DragonFly BSD
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 10:53:06 +0000