summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-08-16Print empty string for not mounted disks. (#148)eplanet
An empty string becomes the default value for format_not_mounted parameter for any disk entry. This avoids printing erroneous values when a filesystem is not mounted.
2016-08-14Move time and ratio computations out of slurp_battery_info. (#151)tommie
This allows OSes that support reporting multiple batteries to simply sum into full_design,full_last,remaining and let print_battery_info make computations.
2016-08-14Move full_design and full_last into struct battery_info.Tommie Gannert
This is in preparation for moving the ratio computation code out of slurp_battery_info to support aggregating multiple batteries.
2016-08-14Also capture charge rate in NetBSD.Tommie Gannert
For time estimates when charging.
2016-08-14Fix warnings about using a char array index on NetBSD.Tommie Gannert
The isspace macro is just a table lookup.
2016-08-14Simplify string comparisons in slurp_battery_info for NetBSD.Tommie Gannert
Doing strlen(a) == strlen(b) && strncmp(a, b, N) seems to have no benefits compared to just strcmp(a, b). The NetBSD cstring properties come from the kernel, not the user. The test for units did a prefix match, but that looked like a bug, the unit is "Watt hour" in my Virtual box.
2016-08-14Make print_disk_info, print_eth_info and print_wireless_info compile on ↵Tommie Gannert
NetBSD without warnings.
2016-08-14Remove warnings about unused variables in slurp_battery_info on OpenBSD.Tommie Gannert
2016-08-14Define IW_ESSID_MAX_SIZE for OpenBSD.Tommie Gannert
Also fixes a signedness warning.
2016-08-03Move OS-specific code to slurp_battery_info.Tommie Gannert
2016-08-03Introduce a struct battery_info to carry information from data retrieval to ↵Tommie Gannert
the output formatter.
2016-08-03Refactor common seconds_remaining code in print_battery_info.Tommie Gannert
2016-08-03Remove an END_COLOR in print_battery_info for OpenBSD.Tommie Gannert
This was probably a bug since it makes no sense to have here.
2016-08-03Move START_COLOR to after OS-specific code.Tommie Gannert
This uses the more direct tests of whether percentage_remaining and seconds_remaining are available or not (rather than looking at present_rate).
2016-08-03Remove consumptionbuf from print_battery_info.Tommie Gannert
2016-08-03Remove emptytimebuf from print_battery_info.Tommie Gannert
This changes the behavior for NetBSD: previously this time was not shown while charging. On Linux it was treated as "full time". This change makes all OSes behave the same. OpenBSD and FreeBSD did not support emptytime previously.
2016-08-03Remove remainingbuf from print_battery_info.Tommie Gannert
2016-08-01Remove percentagebuf from print_battery_info.Tommie Gannert
2016-08-01Remove statusbuf from print_battery_info.Tommie Gannert
2016-07-30Merge pull request #139 from Gjum/wb-colored-cpu-usageMichael Stapelberg
Add CPU usage color thresholds
2016-05-13Add ifdef to compile wireless_info on Mac (#127)Alexis Hildebrandt
2016-05-08reconnect to PulseAudio if connection is lost (fixes #124) (#125)Watcom
2016-04-13Add CPU usage color thresholdsMark Schreiber
CPU usage had previously not supported the color option. Add support for a "degraded" state above which the degraded color is used, and a higher "bad" state above which the "bad" color is used. One possible use for these might be indicating whether one or all cores are saturated. Unlike the color settings for other, these are set high enough to be disabled by default. This is done because i3status determines CPU usage over only the last display interval, which means that, a user with a low refresh rate might see frequent, potentially-annoying color changes.
2016-03-21Added status_unk to battery_infoeoin
2016-03-20Adding glob check to cpu temperature fixes #55eplanet
2016-01-25This removes the 'remaining' time when the battery is full, since the ↵Clayton Craft
remaining time is always 00:00:00. When the battery is discharging, the remaining time will show up again if the user has set their format correctly.
2016-01-12revert back to using nanosleepWatcom Hecht
Fixes #93
2016-01-12Bugfix: check that format_not_mounted is not NULL before using itMichael Stapelberg
This issue was introduced with commit 75a83574. fixes #92
2015-12-27format detection: recognise swaybarDavid
2015-12-04Added support for Pango markup.Kenneth Lyons
2015-11-24fix compilation on FreeBSDMichael Stapelberg
fixes #83
2015-11-16first_eth_interface: ignore MAC addresses, look for IPv4/IPv6 addressesMichael Stapelberg
2015-10-12Correctly calculate Wireless link qualityStefan Bader
Wireless quality was stuck at 100% due to a signed with unsigned integer division.
2015-10-12Volume percentage should be obtained by float division and rounded to int.Jakub Klinkovský
Fixes #75
2015-10-09Merge pull request #71 from bsdjhb/freebsd_wifi_buildfixMichael Stapelberg
Fix build under FreeBSD after recent changes for Linux.
2015-10-08Fix build under FreeBSD after recent changes for Linux.John Baldwin
2015-10-08Properly detect the battery charging status under FreeBSD.John Baldwin
The hw.acpi.battery.state sysctl returns a bitmask of flags as defined in <dev/acpica/acpiio.h>. Use constants from this header to examine the state and check for the charging flag to determine if the battery is charging.
2015-10-04Added support for lemonbarBrendan Van Hook
2015-09-25document code originsMichael Stapelberg
fixes #65
2015-09-25Fix comparison between signed/unsigned warning for realMichael Stapelberg
2015-09-25use proper unsigned type for ESSID lengthMichael Stapelberg
2015-09-25use nlmsg_data instead of the too-new genlmsg_hdrMichael Stapelberg
2015-09-25use NL80211_RATE_INFO_BITRATE (16-bit)Michael Stapelberg
NL80211_RATE_INFO_BITRATE32 is not available widely enough yet (the libc used by travis doesn’t have it yet, for example).
2015-09-24wireless (linux): switch from libiw to libnlMichael Stapelberg
Based on http://cr.i3wm.org/patch/692/ by Alexander Monakov fixes #32 fixes #52
2015-09-16Merge pull request #59 from bsdjhb/freebsd_wifiMichael Stapelberg
Fix various issues with wireless information under FreeBSD:
2015-09-15Fix various issues with wireless information under FreeBSD:John Baldwin
- Instead of hoping that the currently associated AP will show up as the first AP in the list of scan results, fetch the BSSID of the currently associated AP and use that to fetch station info for the AP. This provides more frequently updated signal strength information than scan results and reliably provides information when multiple APs are in range. - Do not treat the RSSI value as a raw signal value in dBm. Instead, use the same formula as ifconfig(8) to compute a signal value. - Do not report the beacon interval value as a signal quality level.
2015-09-15Fix some issues with displaying Ethernet media status on recent FreeBSD kernels.John Baldwin
- Don't apply IFM_SUBTYPE to the raw subtype in the description table. IFM_SUBTYPE() requires a fully populated word and was truncating values in the table when comparing resulting in false matches (notably "10GBase-KX4" for the no media case) after recent changes to add extended Ethernet media states in FreeBSD. - Explicitly check for IFM_ETHER. - Use SIOCGIFXMEDIA when present to obtain extended media states on newer kernels. - Explicitly handle "no carrier".
2015-08-06Use "color_degraded" when interface has no IPDmitrij D. Czarkoff
On laptops one may want to have all interfaces up in order to let network prioritization manage switching between wired and wireless connection. In such cases lack of IP address is a useful hint about currently used interface, and color-coding makes it stand out more.
2015-08-01Use SndIO for volume module on OpenBSDDmitrij D. Czarkoff
* add audio(4) code by Robert Nagy * disable PulseAudio While at OpenBSD support, add "-pthread" to LIBS.
2015-07-06Add ifdef to compile print_disk_info on MacAlexis Hildebrandt
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 02:25:07 +0000