| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
NL80211_RATE_INFO_BITRATE32 is not available widely enough yet (the libc
used by travis doesn’t have it yet, for example).
|
|
Based on http://cr.i3wm.org/patch/692/ by Alexander Monakov
fixes #32
fixes #52
|
|
Fix various issues with wireless information under FreeBSD:
|
|
- Instead of hoping that the currently associated AP will show up as
the first AP in the list of scan results, fetch the BSSID of the
currently associated AP and use that to fetch station info for the
AP. This provides more frequently updated signal strength
information than scan results and reliably provides information when
multiple APs are in range.
- Do not treat the RSSI value as a raw signal value in dBm. Instead, use
the same formula as ifconfig(8) to compute a signal value.
- Do not report the beacon interval value as a signal quality level.
|
|
- Don't apply IFM_SUBTYPE to the raw subtype in the description table.
IFM_SUBTYPE() requires a fully populated word and was truncating values
in the table when comparing resulting in false matches (notably
"10GBase-KX4" for the no media case) after recent changes to add extended
Ethernet media states in FreeBSD.
- Explicitly check for IFM_ETHER.
- Use SIOCGIFXMEDIA when present to obtain extended media states on newer
kernels.
- Explicitly handle "no carrier".
|
|
On laptops one may want to have all interfaces up in order to let network
prioritization manage switching between wired and wireless connection. In such
cases lack of IP address is a useful hint about currently used interface, and
color-coding makes it stand out more.
|
|
* add audio(4) code by Robert Nagy
* disable PulseAudio
While at OpenBSD support, add "-pthread" to LIBS.
|
|
|
|
when THERMAL_ZONE is not defined.
|
|
|
|
This is useful for dynamically mounted devices like thumb drives that get mounted into a directory such as
'/media/$UID/$NAME'.
fixes #33
|
|
|
|
|
|
|
|
This makes the value for %signal match ifconfig(8) in all cases.
|
|
PulseAudio support for volume input
|
|
|
|
Adding format_down option to path_exists and run_watch
|
|
This fixes #1.
|
|
lived/lives in sys/sched.h
|
|
|
|
Move linux variable under LINUX boundaries
|
|
|
|
Follow the changed done for Linux on f0cd726b
|
|
|
|
fixes #10
|
|
From here on, we’ll use clang-format to automatically format the source.
This has worked well in i3, so we are introducing it for i3status.
|
|
adding some words in the manpage
|
|
|
|
|
|
|
|
|
|
The boolean flag 'watt_as_unit' may be used without being initialized if the
configured battery path does not contain expected statistics (for example if
it is misconfigured and points to AC adapter info or simply an unrelated file).
Even though it does not cause ill effects, it causes a warning (true positive)
when running i3status under Valgrind. Initialize the variable to make code
well-defined.
|
|
Since we have deterministic device names in Linux, these strings are a
much better default in the i3status config than "eth0" and "wlan0" (what
we used before).
|
|
In many public WiFis, the 2.4 GHz wireless band is slow due to
congestion, while there is still plenty of bandwidth available on the
5 GHz area. So when debugging wireless issues it's convenient to have
i3status display the frequency of the access point that the interface is
connected to.
This patch adds support for the %frequency tag for wireless interfaces,
so for example:
format_up = "WLAN: %essid - %quality / %frequency"
would result in:
"WLAN: eduroam - 074% / 2.4 GHz"
|
|
dicharching, full)
Replaced hard coded status strings (CHR, BAT, FULL) in
print_battery_info.c with user defined strings. The new strings are
'status_chr', 'status_bat' and 'status_full' and can be set in i3status.conf.
e.g.
status_chr = "⚡ CHR"
If any of the new status strings is omitted the standard strings (CHR,
BAT, FULL) are used.
|
|
fixes #1353
|
|
In my case, the voltage variable would stay initialized as -1,
which caused the calculation of battery charge percentage to be
incorrect (I would get the message that there is no battery present
or even -0% charge).
I have no idea how this would affect other systems, since I don't
have a chance to test this.
|
|
This patch fixes CPU temperature gauge for DragonFly BSD.
Commit 0eeded8 assumed that fetching CPU temperature for DragonFly
BSD was similar to that of FreeBSD but this assumption is false.
|
|
Apparently some notebooks report a negative current, whereas most don’t.
fixes #1249
|
|
brotbart)
fixes #1245
|
|
This patch fixes a bug in which multiple (conflicting) CPU temps may be
included in the output for the "cpu temperature" module.
The bug is due to the way that the code parsed the envsys(4)-returned data,
and would manifest itself on x86-based NetBSD machines, since those use
cputemp(4) as well as acpitz(4), thereby creating multiple envsys(4) entries
with identical descriptions but which refer to different physical sensors.
Instead of matching the description attribute of each device returned by
envsys(4) against the target format, this patch throws away non-matching keys
in the first instruction inside the dict walk. This has the benefit of sparing
unnecessary CPU cycles, and preventing other sensors from being included
erroneously.
Additionally, the THERMAL_ZONE format is now joined with OpenBSD in that it
uses acpitz(4) explicitly. This is prefered since it is much older (dating
back to NetBSD 2.0), and does not exclude x86-based users (as with cputemp(4)).
|
|
This patch takes a similar approach as the NetBSD CPU temperature
code in that it uses proplib(3) to walk dictionaries supplied by
envsys(4).
In addition to providing the basic functionality, it:
* Provides all existing format specifiers (%emptytime %consumption
%status %percentage %remaining)
* Respects all existing config options (hide_seconds, low_threshold,
integer_battery_capacity, last_full_capacity)
* Projects "time until full" when battery status is CS_CHARGING
|
|
* strncmp(s1, s2, strlen(s2)) → BEGINS_WITH(s1, s2)
* strncmp(s1, s2, strlen(s1)) → strcmp(s1, s2)
* Prefer case-insensitive comparison for options
|
|
|
|
New disk module options:
* threshold_type: ^(percentage|[kmgt]?bytes)_(free|avail)$
* low_threshold: <double>
fixes #912
|
|
Fixes the typo in print_seperator()
|
