i3status.git - [no description]

Age	Commit message (Collapse)	Author
2016-01-12	Bugfix: check that format_not_mounted is not NULL before using it	Michael Stapelberg
	This issue was introduced with commit 75a83574. fixes #92
2015-12-27	format detection: recognise swaybar	David

2015-12-04	Added support for Pango markup.	Kenneth Lyons

2015-11-24	fix compilation on FreeBSD	Michael Stapelberg
	fixes #83
2015-11-16	first_eth_interface: ignore MAC addresses, look for IPv4/IPv6 addresses	Michael Stapelberg

2015-10-12	Correctly calculate Wireless link quality	Stefan Bader
	Wireless quality was stuck at 100% due to a signed with unsigned integer division.
2015-10-12	Volume percentage should be obtained by float division and rounded to int.	Jakub Klinkovský
	Fixes #75
2015-10-09	Merge pull request #71 from bsdjhb/freebsd_wifi_buildfix	Michael Stapelberg
	Fix build under FreeBSD after recent changes for Linux.
2015-10-08	Fix build under FreeBSD after recent changes for Linux.	John Baldwin

2015-10-08	Properly detect the battery charging status under FreeBSD.	John Baldwin
	The hw.acpi.battery.state sysctl returns a bitmask of flags as defined in <dev/acpica/acpiio.h>. Use constants from this header to examine the state and check for the charging flag to determine if the battery is charging.
2015-10-04	Added support for lemonbar	Brendan Van Hook

2015-09-25	document code origins	Michael Stapelberg
	fixes #65
2015-09-25	Fix comparison between signed/unsigned warning for real	Michael Stapelberg

2015-09-25	use proper unsigned type for ESSID length	Michael Stapelberg

2015-09-25	use nlmsg_data instead of the too-new genlmsg_hdr	Michael Stapelberg

2015-09-25	use NL80211_RATE_INFO_BITRATE (16-bit)	Michael Stapelberg
	NL80211_RATE_INFO_BITRATE32 is not available widely enough yet (the libc used by travis doesn’t have it yet, for example).
2015-09-24	wireless (linux): switch from libiw to libnl	Michael Stapelberg
	Based on http://cr.i3wm.org/patch/692/ by Alexander Monakov fixes #32 fixes #52
2015-09-16	Merge pull request #59 from bsdjhb/freebsd_wifi	Michael Stapelberg
	Fix various issues with wireless information under FreeBSD:
2015-09-15	Fix various issues with wireless information under FreeBSD:	John Baldwin
	- Instead of hoping that the currently associated AP will show up as the first AP in the list of scan results, fetch the BSSID of the currently associated AP and use that to fetch station info for the AP. This provides more frequently updated signal strength information than scan results and reliably provides information when multiple APs are in range. - Do not treat the RSSI value as a raw signal value in dBm. Instead, use the same formula as ifconfig(8) to compute a signal value. - Do not report the beacon interval value as a signal quality level.
2015-09-15	Fix some issues with displaying Ethernet media status on recent FreeBSD kernels.	John Baldwin
	- Don't apply IFM_SUBTYPE to the raw subtype in the description table. IFM_SUBTYPE() requires a fully populated word and was truncating values in the table when comparing resulting in false matches (notably "10GBase-KX4" for the no media case) after recent changes to add extended Ethernet media states in FreeBSD. - Explicitly check for IFM_ETHER. - Use SIOCGIFXMEDIA when present to obtain extended media states on newer kernels. - Explicitly handle "no carrier".
2015-08-06	Use "color_degraded" when interface has no IP	Dmitrij D. Czarkoff
	On laptops one may want to have all interfaces up in order to let network prioritization manage switching between wired and wireless connection. In such cases lack of IP address is a useful hint about currently used interface, and color-coding makes it stand out more.
2015-08-01	Use SndIO for volume module on OpenBSD	Dmitrij D. Czarkoff
	* add audio(4) code by Robert Nagy * disable PulseAudio While at OpenBSD support, add "-pthread" to LIBS.
2015-07-06	Add ifdef to compile print_disk_info on Mac	Alexis Hildebrandt

2015-07-06	Fix undeclared identifier thermal_zone error	Alexis Hildebrandt
	when THERMAL_ZONE is not defined.
2015-06-12	add apostrophe to error message to fix grammar	Viktor Stanchev

2015-05-29	Use format_not_mounted if the directory for a disk_info block does not exist.	Ingo Bürk
	This is useful for dynamically mounted devices like thumb drives that get mounted into a directory such as '/media/$UID/$NAME'. fixes #33
2015-05-20	Clamp the percentage at 100% when last_full_capacity is enabled.	Michael Stapelberg

2015-05-05	Changed battery info output to HH:MM for consistency accross all platforms	Nicholas Helke

2015-04-19	PulseAudio muted volume support (fixes #27)	Watcom Hecht

2015-04-04	Use the maximum rssi, not the scaled percentage for the signal level.	Jasper Lievisse Adriaanse
	This makes the value for %signal match ifconfig(8) in all cases.
2015-04-03	Merge pull request #7 from Watcom/master	Michael Stapelberg
	PulseAudio support for volume input
2015-04-03	PulseAudio support for volume input	Watcom Hecht

2015-04-02	Merge pull request #17 from chrko/format_down	Michael Stapelberg
	Adding format_down option to path_exists and run_watch
2015-04-02	Adding the option "format_down" to path_exists and run_watch.	Christian Kohlstedde
	This fixes #1.
2015-04-02	sys/dkstat.h has been removed from OpenBSD and it's functionality actually ↵	Jasper Lievisse Adriaanse
	lived/lives in sys/sched.h
2015-03-29	refactoring to avoid code duplication	Watcom Hecht

2015-03-25	print_cpu_usage: Fix warnings on non linux	Baptiste Daroussin
	Move linux variable under LINUX boundaries
2015-03-25	print_eth_info: fix warnings on FreeBSD	Baptiste Daroussin

2015-03-25	print_volume: don’t return, complete the buffer first	Baptiste Daroussin
	Follow the changed done for Linux on f0cd726b
2015-03-25	Fix build on FreeBSD	Baptiste Daroussin

2015-03-23	Pass the "instance" JSON property key for tztime blocks	Ingo Bürk
	fixes #10
2015-03-16	clang-format-3.5 -i */.[ch], update modeline	Michael Stapelberg
	From here on, we’ll use clang-format to automatically format the source. This has worked well in i3, so we are introducing it for i3status.
2015-02-22	removing Yoda-Style	Christian Kohlstedde
	adding some words in the manpage
2015-02-18	Adding optional configuration option to "print_disk_info".	Christian Kohlstedde

2015-02-18	Excluding the code on BSD systems.	Christian Kohlstedde

2015-02-18	Make the code more readable.	Christian Kohlstedde

2015-02-18	Modify print_disk_info. Now there is no output if the path is no mountpoint.	Christian Kohlstedde

2014-12-22	Avoid use of uninitialized variable in print_battery_info	Alexander Monakov
	The boolean flag 'watt_as_unit' may be used without being initialized if the configured battery path does not contain expected statistics (for example if it is misconfigured and points to AC adapter info or simply an unrelated file). Even though it does not cause ill effects, it causes a warning (true positive) when running i3status under Valgrind. Initialize the variable to make code well-defined.
2014-12-07	support the special interface name _first_ for ethernet/wireless	Michael Stapelberg
	Since we have deterministic device names in Linux, these strings are a much better default in the i3status config than "eth0" and "wlan0" (what we used before).
2014-12-03	i3status: Support %frequency for wireless interfaces	Tuomas Tynkkynen
	In many public WiFis, the 2.4 GHz wireless band is slow due to congestion, while there is still plenty of bandwidth available on the 5 GHz area. So when debugging wireless issues it's convenient to have i3status display the frequency of the access point that the interface is connected to. This patch adds support for the %frequency tag for wireless interfaces, so for example: format_up = "WLAN: %essid - %quality / %frequency" would result in: "WLAN: eduroam - 074% / 2.4 GHz"